Home/Products/Tile Adhesive
ROCKFIX BUILDING CHEMICALS TILE ADHESIVE 20KG
45 to 55sq ft of tiling per bag, at a 3 mm bed

Rockfix · 20 kg bag

Rockfix Tile Adhesive

Strong bond for long-lasting tiles

Fix ceramic, vitrified and natural stone tiles on floors and walls, inside or outside. Rockfix Tile Adhesive grips harder than sand and cement, needs no soaking and keeps tiles from going hollow.

  • Excellent adhesion
  • For interior and exterior
  • Suitable for all tiles
  • Water resistant
₹349per bag · GST included

Delivered to your home or site

About this product

Why it works better.

Old-style sand and cement mortar shrinks as it dries. That leaves gaps behind the tile, and gaps are where the hollow sound and the cracks come from. Rockfix Tile Adhesive is a polymer modified, cement based adhesive that you spread in a thin, even bed, so the whole tile sits in full contact.

It works on plastered walls, concrete floors and existing tiles, and it holds large vitrified slabs that ordinary mortar struggles with. Mix it with clean water, comb it on with a notched trowel and press the tile in.

Calculator

How much tile adhesive do you need?

You need about4 bags
Cost₹0GST included

Technical details

The specs.

Pack size20 kg bag
ColourGrey
TypePolymer modified cementitious tile adhesive
Mixing waterAbout 5 to 5.5 litres per 20 kg bag
Pot lifeAbout 2 hours after mixing
Open timeAbout 20 minutes
GroutingAfter 24 hours
Use onPlaster, concrete, screed and existing tiles
Shelf life12 months in a sealed bag, kept dry
CoverageAbout 45 to 55 sq ft of tiling per bag, at a 3 mm bed

How to use

Five steps.

  1. 1

    Clean the surface. Remove dust, oil and loose plaster.

  2. 2

    Add the powder to about 5 litres of clean water and mix to a smooth, lump-free paste.

  3. 3

    Spread with a 6 mm notched trowel, about 1 square metre at a time.

  4. 4

    Press each tile in and slide it slightly so the back is fully covered.

  5. 5

    Leave for 24 hours, then grout with Rockfix Tile Grout.

ROCKFIX BUILDING CHEMICALS TILE GROUT 1KG

Goes well with

Rockfix Tile Grout

Perfect finish for tile joints. ₹79 per pack.

View

Questions

Asked on site.

Can I fix new tiles over old tiles?

Yes. Clean the old tiles well, scratch any glossy surface and make sure they are firmly stuck. Rockfix Tile Adhesive bonds to them directly.

Do I need to soak the tiles first?

No. That is only needed with sand and cement. Fix the tiles dry.

Can I use it for large 2×4 ft vitrified tiles?

Yes. Use a 10 to 12 mm notched trowel and also spread a thin coat on the back of each tile.

How long before I can walk on the floor?

Light foot traffic after 24 hours. Wait 7 days before heavy loads.

The full range

All five Rockfix products.

₹34920 kg bag